What Information Do Manufacturers Need for a Ceramic Core PCB Quote?

A manufacturer needs your Gerber files, board size, substrate material, copper or conductor details, surface finish, quantity and delivery date to price a ceramic core PCB properly. Add a BOM if you want the boards assembled. Leave any of it out and the quote turns into a guess.

Here’s what we see all the time at BSTCeramicPCB: a client sends a half-finished brief, gets a quick number back, then watches that number climb once the engineers open the files. We’ve been building ceramic boards since 2006, and our on-time delivery sits at 97.2%, so we’d rather ask the awkward questions early.

What Does a Ceramic Core PCB Quote Request Need First?

The design files. Gerbers show the layers, traces and pad positions, and a drawing fills in outline, thickness and tolerances. Without them, our estimator is working from imagination. It also helps to know where the board ends up, say a laser unit, a sensor or an LED module, because the application can change what we recommend for the substrate.

Which Material and Process Details Should You Share?

Ceramic boards vary a lot, so any ceramic core PCB request should spell out the build. We look for:

  • Substrate type (alumina, aluminum nitride) and thickness
  • Process: thick film, thin film, DPC, DBC, AMB, LTCC or HTCC
  • Copper weight or conductor thickness
  • Minimum line width and spacing
  • Surface finish, such as gold
  • Vias and special tolerances

Don’t worry if line widths are only a ballpark. Even that helps. For context, thick film work here goes down to 6/8 mil, and DPC can reach 3/3 mil.

Why Do Quantity and Lead Time Move the Price?

Ten prototypes and ten thousand production boards are two very different jobs. Tooling, panel layout and material buying all get spread over your volume, so the unit price shifts with it. Lead time works the same way. We can run more than 7,000 panels a day and turn orders around in as little as a week, but a rush slot pushes other jobs aside, and that cost lands somewhere. Give us a sensible window for your ceramic core PCB and the price usually comes out kinder.

How Does Assembly Change the Quote?

Once assembly joins the job, your ceramic core PCB quote needs a little more from you. Please send:

  • A full BOM with manufacturer part numbers
  • Component position files
  • SMD or plug-in parts, and soldering preferences
  • Any testing or inspection you expect

If the board is headed for a car or a medical device, mention the standard you need. We hold IATF 16949, ISO 13485 and RoHS certification, so that conversation is short.

What Slows a Quote Down?

Usually it’s something small. An old Gerber revision. A thickness nobody wrote down. A BOM that doesn’t match the layout. Read through your ceramic core PCB package once more before sending; five minutes there can save a few days later.

Ready to Request a Quote?

Send your files to BSTCeramicPCB and we’ll come back with a clear, detailed quote. Email sales@bstceramicpcb.com, call +86 (755) 2909-1603, or message us on WhatsApp or WeChat at +86-18926468046.

FAQs

Can I get a quote with only a drawing?

You can get an estimate, but Gerber files give the most accurate price.

Do I always need a BOM?

Only if you want assembly. Bare boards need design files and specifications.

How quickly can an order ship?

Quick turnaround can be as short as one week, depending on complexity and quantity.

Comments

  • No comments yet.
  • Add a comment